Contact Customer Support: (225) 687-2627 or stabcat@cox.net for Purchase Price or Rental Rates and Instructions for Set Up and Usage.




Every Ground Release Shackle, SheetMaster 10 Ton GRS, MasterLink GRS 20 Ton GRS, MasterLink 40 Ton GRS Shackles and 10 Ton Spreader Bar are Individually stamped with a Serial Number on each one and are Load Proof tested by an Independent OSHA approved Independent Testing Laboratory. Stab Cat, Inc. is the only in house Manufacturer known worldwide to exhaustively Laboratory and Job Test every individual item. Test Certificates furnished to Clients at time of sale.



  • STAB CAT THREADER


    This Threader will set any steel Sheet Pile manufactured today. With proper adjustment it will set single, double sheets and corners.

    To learn more, please call (225) 687-2627 or stabcat@cox.net.






  • POSITIVE SAFETY GROUND RELEASE SHACKLE


    Attach one-half inch (1/2") rope to Trip Lanyard (Small Thimble "A") and Plunger Lanyard (Ring "B") of sufficient length to be handheld when load is 'lifted' into position and secured so Shackle can be released.

    TO ATTACH SHACKLE: When the Plunger (B) is 'retracted' the Trip (A) is 'spring-loaded' and will be extended into the Plunger (B) and will 'hold' the Plunger (B) in the retracted position. To release the Plunger (B), simply 'pull' (retract) the Trip Lanyard (A) and the Plunger (B) will 'extend' into position for lifting and the Trip (A) will extend 'behind' the Plunger (B) to 'lock' the Plunger (B) in the extended position. BOTH ROPES ON "A" AND "B" MUST BE SEPARATE AND NOT TIED TOGETHER.

    NOTE: User must not use ropes as 'Tag Lines' under any circumstance! Full attention by the User must be given to both ropes attached to the Trip Lanyard and the Plunger Lanyard at all times to prevent them from becoming 'fouled' and/or 'snagged'!

    TO RELEASE SHACKLE: Pull (retract) the Trip (A) and hold in the 'retracted' position, until the Plunger (B) is retracted, then release the Trip (A) and it will extend into the Plunger (B) and keep the Plunger (B) from 're-extending'.

    To learn more, please call (225) 687-2627 or stabcat@cox.net.






  • 10 Ton SPREADER BAR

    Every Spreader Bar has a Serial Number and is 'pull tested' by a Testing Laboratory and a Test Certificate is furnished with each Spreader Bar sold by Stab Cat, Inc.

    To learn more, please call (225) 687-2627 or stabcat@cox.net.






  • ADJUSTABLE SPREADER BAR


    WITH 10 TON SHEET MASTER SHACKLES



    This arrangement may be used when 'head-room' Below the Hook (BTH) is minimal. Safety/Bolt Shackles must be used for all connections.

    To learn more, please call (225) 687-2627 or stabcat@cox.net.






  • STAB CAT SPREADER BAR- "DRESSED"



    This view of the Stab Cat Spreader Bar is shown 'dressed' with recommended attachment rigging. The Lifting chokers below the Hook are 3/4" diameter x 36" overall and attached at 60 degrees or less for maximum capacity to the Spreader Bar with adequate Safety/Bolt Shackles. Beneath the 'stiffener' Bar/Plate of the Spreader Bar are six holes, three each side of center. These are for 'width' adjustment for different width Sheet Pile. Two adequate Safety/Bolt Shackles are attached to the Spreader Bar in the desired holes and two 3/4" diameter x 36" overall chokers. These two chokers extend to attach to two SheetMaster Ground Release Shackles with adequate Safety/Bolt Shackles.

    To learn more, please call (225) 687-2627 or stabcat@cox.net.



  • MASTERLINK 20 TON SWL GROUND RELEASE SHACKLE


    The MasterLink 20 ton Ground Release Shackle was developed by Stab Cat, Inc. to provide a medium "Heavy Lift" Ground Release Shackle for the Piling Industry for the need of handling recently introduced Mono-pile, Caissons, Conductor Pipe (Oil Wells) and other applications

    Attach "Tag Line" to Plunger Lanyard Ring and attach a second "Tag Line" to Trip Lanyard TO RETRACT PLUNGER: Pull Trip Lanyard and hold Trip momentarily to dis-engage from Plunger - Pull Plunger Lanyard slightly, and release Trip Lanyard, then retract the Plunger all the way until the Trip re-engages and keep the Plunger retracted. This will 'detach' Shackle from Load

    TO EXTEND PLUNGER: Pull Trip Lanyard and Plunger will be released and will engage automatically and attach to Load.


    To learn more, please call (225) 687-2627 or stabcat@cox.net.







  • MASTERLINK 40 TON SWL GROUND RELEASE SHACKLE



    The MasterLink 40 ton Ground Release Shackle was developed by Stab Cat, Inc. to provide a "Heavy Lift" Ground Release Shackle for the Piling Industry for the need of handling recently introduced Mono-pile, Caissons, Conductor Pipe (Oil Wells) and other applications -

    Attach "Tag Lines" to Lanyards "A" and "B". Lanyards "C" and "D" can be engaged and disengaged by Hand.

    TO RETRACT PLUNGER: Pull (Locking Trip) "B" Lanyard and "C" Trip will engage (not shown). After "C" Trip is engaged Pull "A" Lanyard and "D" Lanyard will engage and keep the Plunger retracted. This will 'detach' Shackle from Load -

    TO EXTEND PLUNGER: Pull Lanyards "D" and "C" and Plunger "A" will be released and will engage automatically and attach to Load.

    To learn more, please call (225) 687-2627 or stabcat@cox.net.